3/4/5mm thickness SBS polyester reinforcement-based modified bitumen PE/Aluminum foil/Sand/ Mineral surface torch applied roofing felt Root Penetration Resistance waterproofing membrane roll.

SBS-modified bitumen waterproof membrane, its base materials are polyester felt, or polyester felt reinforced with glass fiber, dipped and coated with SBS thermoplastic elastomer modified bitumen, both sides are covered with fine sand, mineral granular, PE film, and aluminum foil.

Specification:

Place of Origin:	China
Certification:	ISO9001, ISO14001
Thickness available:	3mm, 4mm,5mm
Width:	1m or customized
Length:	7. 5m, 10m, 15m, or customized
Minimum Order Quantity:	100 square meters
Price:	FOB Qingdao USD1.00-5.00/sqm
Packaging Details:	Tape Plastic Bag
Delivery Time:	7 days after order confirmation
Payment Terms:	T/T, L/C, D/P, or others
Supply Ability:	4 million square meters per month

Product Features: 

1) Good waterproof performance.

2) High tensile and tearing strength, elongation, and size stability which accommodates substrate movement and deformation.

3) SBS Modified Bitumen Waterproof Membrane is better for building waterproof with low temperature.

4) Anti-puncture and rooting resistant, fatigue resistant, anti-corrosion, mildew resistant, and weather resistant.

5) Easily operate with the hot-melting method.

Application:

1) Roof and underground in industrial and civil buildings, wall, toilet.

2) Bridge, subway, tunnel, swimming pool, etc.

3) Waste landfill, sewage plant, irrigation system, etc.

Attention:

Make sure the roof deck is smooth, clean, and dry (moisture<9%), then apply the surface of the roof deck homogeneously with kind bitumen paint, till dry to start the application.

1) Heating and melting method

Heat the polyethylene film of the membrane and roof deck surface by heating and melting method to be nearly melted (not flowing), then install the membrane fully bonded to the roof deck with overlaps of 5-10cm.

2) Cold adhesive method

Pour the cold adhesive homogeneously on the roof deck, then roll the membrane to install it to be fully sealed to the roof deck.

By heating and melting method and by cold adhesive can be used in alternation in the application as requested. After application, a full serious inspection is required to sure no air bubbles, no folds, and no falling away. etc.

Storage and Transportation:

1) Separate storage for different models.

2) Temperature should be below 50 ℃.

3) Avoid direct sunshine, and rain, and keep ventilated.

4) Do not pile horizontally, keep a stand and not more than 2 floors.

SINOMTC, one of the largest China manufacturers and suppliers, now brings you 3/4/5mm thickness SBS polyester reinforcement-based modified bitumen pe/aluminum foil/sand/ mineral surface torch applied roofing felt root penetration resistance waterproofing membrane roll from its professional factory. Please rest assured to buy.

If you want to know more about it, please contact us at carlos@onices.com